Load space of a Mercedes Sprinter with sacks, boards and red lashing straps
Van rental

GVW, payload and van dimensions — how to read the registration certificate and how much you can really load

GVW (gross vehicle weight, DMC in Polish) is the maximum weight of a vehicle including cargo, driver and passengers. Payload is the difference between the GVW and the vehicle’s kerb weight. In a cargo van with a 3.5 t GVW you are usually left with around 1–1.3 t for cargo — in the Mercedes Sprinter 317 CDI L3H2 it is 1160 kg. You can find such a van in our cargo van rental Wrocław offer, on a category B licence.

3500 kgvan GVW for category B
1160 kgSprinter L3H2 payload
14.5 m³load space volume
field F.2GVW on the certificate

Three figures you need to know

TermWhat it meansWhere on the certificate
GVW (DMC) — permissible gross vehicle weightthe maximum weight of the vehicle with cargo and occupants that is approved for road usefield F.2
Maximum technical gross weightthe weight set by the manufacturer; it can be higher than the GVWfield F.1
Kerb weightthe weight of the empty, ready-to-drive vehiclefield G
Payloadhow much you can load: GVW − kerb weightyou calculate it yourself

How to calculate payload

Payload = GVW − kerb weight. Remember that the driver and passengers count towards the load as well. An example for a cargo van:

ItemWeight
GVW (field F.2)3500 kg
Kerb weight (field G)approx. 2340 kg
Payload1160 kg
Driver + passengerapprox. 160 kg
Left for cargoapprox. 1000 kg

Overloading is about more than a fine

An overloaded van takes longer to brake, handles worse and wears its tyres faster. After a collision the insurer may reduce the payout, and if the GVW is exceeded by a large margin the driver no longer falls within a category B licence.

How much do typical loads weigh?

LoadApproximate weightHow many fit at approx. 1000 kg
Box of books (40×30×30 cm)approx. 15–20 kgapprox. 50–60 boxes
Washing machineapprox. 60–75 kg—
3-seater sofaapprox. 60–90 kg—
Plasterboard 12.5 mm, 120×260 cmapprox. 26–28 kgapprox. 36–38 sheets
25 kg bag of cement25 kg40 bags
Pallet of paving stonesapprox. 1200–1500 kgwon’t fit — too heavy

Furniture and house moves rarely reach the weight limit — you usually run out of space first. With building materials it is the other way round: the van is half empty but already overloaded. We describe practical examples in our articles on transporting bulky items and on hiring a van for a house move.

Mercedes-Benz Sprinter 317 CDI L3H2 cargo van for hire in Wrocław

Mercedes-Benz Sprinter 317 CDI L3H2

Load space
4300 × 1700 × 2000 mm (14.5 m³)
Payload
1160 kg
Engine
2.0 diesel 170 hp, automatic, rear-wheel drive
Driving licence
category B
from 229 PLN for 5 hours379 PLN / dayVehicle details

Load space dimensions — volume isn’t everything

Volume in m³ helps you judge how many boxes will fit, but for furniture the dimensions are what matter. The Sprinter L3H2 load space measures 430 × 170 × 200 cm (length × width × height). The width between the wheel arches is less than 170 cm — lay 120 cm boards flat on the floor.

Sprinter 14.5 m³ on a category B licence

Cargo van from 229 PLN for 5 hours.

GVW and your driving licence

The GVW also decides which driving licence you need. Category B is enough up to 3.5 t — which is why the entire Wayz fleet, including the car transporter, has a GVW of no more than 3.5 t. You will find a full explanation of the category limits in our article on which van you can drive on a category B licence. For a car transporter, the payload determines which car you can carry — see car transporter for a passenger car.

A comparison of passenger and cargo vehicles is in our article on passenger van or cargo van.

Load distribution and axle load

Even if you stay within the payload, a badly distributed load can overload a single axle. The rules are simple:

  • load the heaviest items low and close to the cab wall, over or in front of the rear axle,
  • don’t put everything at the end of the load space — that unloads the front axle and the van steers worse,
  • spread the weight evenly between the left and right sides,
  • secure the load to the anchor points in the floor — a shifting load changes the weight distribution in a corner.

How to estimate load weight without scales

  1. Check the labels.Sacks, boards, paints and panels have their weight on the packaging — add it up while you are still in the shop.
  2. Use catalogue data.Furniture and appliance manufacturers give the weight in the product specification.
  3. Allow a margin.Add 10% for pallets, packaging and tools, plus the weight of the people in the cab.

Not sure whether you will stay within the limit? Give us a call — we will advise before you book. You will find details of the fleet on the van hire in Wrocław page.

What the L2H2 and L3H2 designations mean and how body dimensions translate into load space is explained in our article on cargo van sizes.

Frequently asked questions

Are GVW and payload the same thing?

No. The GVW is the weight of the whole vehicle with cargo (e.g. 3500 kg), while the payload is only what you can load (e.g. 1160 kg).

Do passengers count towards the payload?

Yes. The weight of the driver and passengers reduces the amount of cargo you can take.

Where can I check the GVW of a hired van?

In the registration certificate (field F.2), which is kept in the vehicle. For the Wayz fleet the GVW is up to 3.5 t.

Guide

Articles you may find useful